Half-square triangle calculator
A half-square triangle unit is a square split on one diagonal into two triangles of different fabrics. Type the finished size and how many units you need; the table gives the square size and count for each common way of making them.
| Method | Cut | From each fabric | Makes |
|---|---|---|---|
| Two at a time | 3⅞″ squares | 4 | 8 units, exact size |
| Two at a time, trim | 4″ squares | 4 | 8 units, trim to 3½″ |
| Four at a time | 5½″ squares | 2 | 8 units, trim to 3½″; outer edges on the bias |
| Eight at a time | 7¾″ squares | 1 | 8 units, exact size |
| Cut triangles first | 3⅞″ squares, cut once diagonally | 4 | 8 triangles of each fabric |
Which method to use
Two at a time
Draw a diagonal on the wrong side of the lighter square, lay it on the darker one right sides together, sew ¼″ on each side of the line, cut on the line and press. With the finished size plus ⅞″ the units come out exactly the unfinished size when the seam is a true ¼″. Every outer edge is on the straight grain.
Two at a time, trimmed
Add 1″ instead of ⅞″ and trim each unit to the finished size plus ½″, lining up the 45° line of a square ruler on the seam. Slower, but small errors in cutting or seam width are cut away rather than carried into the block.
Four at a time
Put two squares right sides together, sew ¼″ in from all four edges, then cut on both diagonals. The square is (finished size + ⅞″) × 1.414, which never lands on a ruler line, so the chart rounds up to the next ⅛″ and the units are trimmed. All four outer edges of each unit are on the bias, so starch first and press without pushing.
Eight at a time
Draw both diagonals on the lighter square, sew ¼″ on each side of both lines, cut the square in half across the middle both ways, then cut on the drawn lines. Eight units from one pair of squares, outer edges on the straight grain. The square is twice the finished size plus 1¾″.
Cut triangles first
Cut squares at the finished size plus ⅞″ once on the diagonal and sew the triangles together along the long edges. Those long edges are bias and stretch, which makes this the hand-piecer’s method, or the way to mix many fabrics in one block.
Why ⅞″?
A ¼″ seam allowance on all three sides of a right-angle triangle adds 0.854″ to each short side, not ½″: the allowance along the diagonal pushes both corners out by ¼″ × √2 as well. ⅞″ (0.875″) is the nearest ruler line above 0.854″, so every unit has about 1/50″ of slack, which disappears into the seam. The full geometry.
Cut sizes from 1″ to 12″
| Finished | Two at a time | Two, trim | Four at a time* | Eight at a time |
|---|---|---|---|---|
| 1″ | 1⅞″ | 2″ | 2¾″ | 3¾″ |
| 1½″ | 2⅜″ | 2½″ | 3⅜″ | 4¾″ |
| 2″ | 2⅞″ | 3″ | 4⅛″ | 5¾″ |
| 2½″ | 3⅜″ | 3½″ | 4⅞″ | 6¾″ |
| 3″ | 3⅞″ | 4″ | 5½″ | 7¾″ |
| 3½″ | 4⅜″ | 4½″ | 6¼″ | 8¾″ |
| 4″ | 4⅞″ | 5″ | 7″ | 9¾″ |
| 4½″ | 5⅜″ | 5½″ | 7⅝″ | 10¾″ |
| 5″ | 5⅞″ | 6″ | 8⅜″ | 11¾″ |
| 5½″ | 6⅜″ | 6½″ | 9⅛″ | 12¾″ |
| 6″ | 6⅞″ | 7″ | 9¾″ | 13¾″ |
| 6½″ | 7⅜″ | 7½″ | 10½″ | 14¾″ |
| 7″ | 7⅞″ | 8″ | 11¼″ | 15¾″ |
| 7½″ | 8⅜″ | 8½″ | 11⅞″ | 16¾″ |
| 8″ | 8⅞″ | 9″ | 12⅝″ | 17¾″ |
| 8½″ | 9⅜″ | 9½″ | 13⅜″ | 18¾″ |
| 9″ | 9⅞″ | 10″ | 14″ | 19¾″ |
| 9½″ | 10⅜″ | 10½″ | 14¾″ | 20¾″ |
| 10″ | 10⅞″ | 11″ | 15½″ | 21¾″ |
| 10½″ | 11⅜″ | 11½″ | 16⅛″ | 22¾″ |
| 11″ | 11⅞″ | 12″ | 16⅞″ | 23¾″ |
| 11½″ | 12⅜″ | 12½″ | 17⅝″ | 24¾″ |
| 12″ | 12⅞″ | 13″ | 18¼″ | 25¾″ |
* Four at a time is rounded up to the next ⅛″; trim those units to size.