Seam Quarter

Friendship Star quilt block

Friendship Star quilt block diagram
Friendship Star: 3 × 3 grid, 5 squares and 4 half-square triangles.

Four half-square triangle units surround a centre square of fabric B, with corner squares in fabric A, so a single diagonal seam makes each star point.

  • Fabric A background
  • Fabric B star

Cutting chart

For one 12″ finished block (12½″ with seam allowance). Change the size above for any other.

FabricCut
Fabric Abackground
  • 2 × 4⅞″ squarepair with fabric B: 4 HST units
  • 4 × 4½″ square
Fabric Bstar
  • 2 × 4⅞″ squarepaired with fabric A
  • 1 × 4½″ square

Between 4″ and 24″ these finished sizes put every cut on a ⅛″ ruler line: 4½″, 5¼″, 6″, 6¾″, 7½″, 8¼″, 9″, 9¾″, 10½″, 11¼″, 12″, 12¾″, 13½″, 14¼″, 15″, 15¾″, 16½″, 17¼″, 18″, 18¾″, 19½″, 20¼″, 21″, 21¾″, 22½″, 23¼″, 24″.

Yardage for a whole quilt

Finished quilt: 56″ × 68″ from 20 blocks. Batting at least 64″ × 76″.

FabricBuyStrips across the width
Fabric Abackground2⅛ yd5 × 4⅞″, 10 × 4½″ strips
Fabric Bstar1¼ yd5 × 4⅞″, 3 × 4½″ strips
Border⅞ yd6 strips 4½″ wide, joined end to end
Binding⅝ yd7 strips 2½″ wide (double-fold), 260″ joined
Backing (42″ fabric)3¾ yd2 panels 64″ long, 1 horizontal seam; backing 64″ × 76″

Yardage assumes 40″ of usable width, strips cut across the fabric, and 4″ for straightening, rounded up to the next ⅛ yard.

How it goes together

Friendship Star block pulled apart into its sewing rows
  1. Row 1: square, half-square triangle, square.
  2. Row 2: half-square triangle, square, half-square triangle.
  3. Row 3: square, half-square triangle, square.
  4. Sew the pieces of each row together, then join the 3 rows.

Printable templates

For hand piecing, or to check a rotary cut against paper: one full-size template for each different shape, with the cutting line solid and the sewing line dashed, at the size in the cutting chart.

Print at 100% (“Actual size”) and measure the 1″ test square before cutting.

Notes on sewing the Friendship Star

Fabric B makes both the centre square and the triangles that form the star, so the star reads as one shape in a single fabric against fabric A. That makes the contrast between A and B decisive; when the two are close, the star flattens into a patch. For a livelier effect, cut the centre square from a stronger fabric than the points, or vary fabric B from block to block.

Edge to edge, the block creates a lattice where the plain corner squares of fabric A from neighbouring blocks join into larger squares, and the stars appear to float between them. Setting the blocks with plain alternate squares gives a quieter quilt, and sashing separates each star clearly. Scrappy stars in a limited palette can sit against one continuous background.

  • Press rows 1 and 3 toward the corner squares and row 2 toward the centre square. The seams then oppose at each crossing, giving flat joins.
  • The diagonal seam of each half-square triangle unit lies on the bias. Press from the fabric B side and avoid dragging the iron, which stretches the unit out of square.
  • Lay the four triangle units around the centre before sewing. All four fabric B triangles should point the same way round the star, and one turned unit makes the star lopsided.
  • If the half-square triangles are made oversize and trimmed, trim all four the same way, with the ruler’s 45° line on the seam, so the diagonal runs exactly corner to corner.

More nine-patch blocks