Seam Quarter

Nine Patch quilt block

Nine Patch quilt block diagram
Nine Patch: 3 × 3 grid, 9 squares.

Nine squares in three rows, five from fabric B and four from fabric A, giving a plain grid block where nesting seams do almost all the work.

  • Fabric A background
  • Fabric B dark squares

Cutting chart

For one 12″ finished block (12½″ with seam allowance). Change the size above for any other.

FabricCut
Fabric Abackground
  • 4 × 4½″ square
Fabric Bdark squares
  • 5 × 4½″ square

Between 4″ and 24″ these finished sizes put every cut on a ⅛″ ruler line: 4½″, 5¼″, 6″, 6¾″, 7½″, 8¼″, 9″, 9¾″, 10½″, 11¼″, 12″, 12¾″, 13½″, 14¼″, 15″, 15¾″, 16½″, 17¼″, 18″, 18¾″, 19½″, 20¼″, 21″, 21¾″, 22½″, 23¼″, 24″.

Yardage for a whole quilt

Finished quilt: 56″ × 68″ from 20 blocks. Batting at least 64″ × 76″.

FabricBuyStrips across the width
Fabric Abackground1⅜ yd10 × 4½″ strips
Fabric Bdark squares1¾ yd13 × 4½″ strips
Border⅞ yd6 strips 4½″ wide, joined end to end
Binding⅝ yd7 strips 2½″ wide (double-fold), 260″ joined
Backing (42″ fabric)3¾ yd2 panels 64″ long, 1 horizontal seam; backing 64″ × 76″

Yardage assumes 40″ of usable width, strips cut across the fabric, and 4″ for straightening, rounded up to the next ⅛ yard.

How it goes together

Nine Patch block pulled apart into its sewing rows
  1. Row 1: square, square, square.
  2. Row 2: square, square, square.
  3. Row 3: square, square, square.
  4. Sew the pieces of each row together, then join the 3 rows.

Printable templates

For hand piecing, or to check a rotary cut against paper: one full-size template for each different shape, with the cutting line solid and the sewing line dashed, at the size in the cutting chart.

Print at 100% (“Actual size”) and measure the 1″ test square before cutting.

Notes on sewing the Nine Patch

Five dark squares and four background squares means that, set as a checkerboard, fabric B takes the corners and the centre. The block needs clear contrast between A and B to show the grid; if the two are close in tone, it reads as a single mottled square. Using a feature print for the centre square, or varying fabric B between the corners, turns the same pattern into a scrappy block with a quiet structure underneath.

Repeated, nine-patch blocks join into a large checkerboard where the dark squares link diagonally from block to block. Alternating them with plain squares of fabric A makes a chain of dark squares across the quilt. Sashing in a third fabric separates the blocks into individual units, while an on-point setting turns the chains into diamonds. This is a straightforward block for a first pieced quilt.

  • Press every row toward fabric B: outward to the corners in rows 1 and 3, inward to the centre in row 2. The seams then oppose where the rows meet and the crossings lock into place.
  • Cut the dark and light squares from strips of the same width and sew all the rows from matching pairs. Matching width keeps the three rows exactly the same length.
  • Pin at each of the four seam crossings before joining the rows, pushing the seams together so the crossings stay sharp.
  • Check the middle row for stretching after pressing. It has two seams and no support at the ends, so press with an up-and-down motion rather than dragging the iron.

More nine-patch blocks