Ohio Star quilt block
A three-by-three block with four corner squares of fabric A, a centre square of fabric C and four hourglass units that carry the star points in fabric B.
- Fabric A background
- Fabric B star points
- Fabric C centre square
Cutting chart
For one 12″ finished block (12½″ with seam allowance). Change the size above for any other.
| Fabric | Cut |
|---|---|
| Fabric Abackground |
|
| Fabric Bstar points |
|
| Fabric Ccentre square |
|
Between 4″ and 24″ these finished sizes put every cut on a ⅛″ ruler line: 4½″, 5¼″, 6″, 6¾″, 7½″, 8¼″, 9″, 9¾″, 10½″, 11¼″, 12″, 12¾″, 13½″, 14¼″, 15″, 15¾″, 16½″, 17¼″, 18″, 18¾″, 19½″, 20¼″, 21″, 21¾″, 22½″, 23¼″, 24″.
Yardage for a whole quilt
Finished quilt: 56″ × 68″ from 20 blocks. Batting at least 64″ × 76″.
| Fabric | Buy | Strips across the width |
|---|---|---|
| Fabric Abackground | 2¼ yd | 6 × 5¼″, 10 × 4½″ strips |
| Fabric Bstar points | 1 yd | 6 × 5¼″ strips |
| Fabric Ccentre square | ½ yd | 3 × 4½″ strips |
| Border | ⅞ yd | 6 strips 4½″ wide, joined end to end |
| Binding | ⅝ yd | 7 strips 2½″ wide (double-fold), 260″ joined |
| Backing (42″ fabric) | 3¾ yd | 2 panels 64″ long, 1 horizontal seam; backing 64″ × 76″ |
Yardage assumes 40″ of usable width, strips cut across the fabric, and 4″ for straightening, rounded up to the next ⅛ yard.
How it goes together
- Row 1: square, hourglass unit, square.
- Row 2: hourglass unit, square, hourglass unit.
- Row 3: square, hourglass unit, square.
- Sew the pieces of each row together, then join the 3 rows.
Printable templates
For hand piecing, or to check a rotary cut against paper: one full-size template for each different shape, with the cutting line solid and the sewing line dashed, at the size in the cutting chart.
Print at 100% (“Actual size”) and measure the 1″ test square before cutting.
Notes on sewing the Ohio Star
Fabric B, the star points, needs to stand clearly apart from fabric A, the background, or the star dissolves into the ground. Fabric C is the centre square and is the natural place for a bolder or more patterned fabric, which pulls the eye inward. If C is close to B in value, the centre merges with the points and the star loses its hub. A tonal B with a more interesting C is a reliable pairing.
Repeated in a quilt, the stars can sit alone with plain alternate squares of fabric A or be set side by side, in which case the corner squares form a lattice and the stars seem to float. Sashing gives each star a frame. A scrappy version, with a different B in every block and a shared A, unifies the quilt through the background alone.
- Hourglass units are sewn on diagonal seams, so the seams inside them sit on the bias. Handle them gently and press rather than iron, or the units will stretch out of square.
- Press rows 1 and 3 toward the corner squares and row 2 toward the centre square. The seams then oppose where the rows meet.
- Lay out all nine pieces against the diagram before sewing. Each hourglass unit looks the same from either end, so the mistake to watch is turning one a quarter turn.
- Sew the rows with the hourglass unit on top, so the stitching passes just outside the point where the star triangles meet, and no points are cut off.