Flying geese calculator
A flying-geese unit is a rectangle twice as wide as it is tall: one large triangle, the goose, and two small ones, the sky. Type the finished width and how many units you need for the cut sizes of the three usual methods, and how much fabric each one uses.
| Method | Goose fabric | Sky fabric | Makes |
|---|---|---|---|
| No-waste, four at a time | 2 × 5¼″ square | 8 × 2⅞″ squares | 8 units |
| Stitch and flip | 8 × 2½″ by 4½″ | 16 × 2½″ squares | 8 units |
| Cut triangles first | 2 × 5¼″ square, cut twice | 8 × 2⅞″ squares, cut once | 8 units |
The three methods
No-waste, four at a time
Lay two small sky squares on opposite corners of the large goose square, right sides together; they overlap in the middle. Draw a line corner to corner across them, sew ¼″ on both sides of it, cut on the line and press the small triangles open. On each of the two pieces, lay a third small square on the remaining corner, draw, sew ¼″ on both sides, cut and press. Four geese, no offcuts. The large square is the finished width plus 1¼″ and the small ones the finished height plus ⅞″, the same allowances as hourglass and half-square triangle units, because that is what the goose and the sky are.
Stitch and flip
Sew a sky square on one end of a goose rectangle along the diagonal, trim and press, then repeat on the other end. Every piece is cut on the straight grain and the sewing is the easiest of the three, at the cost of the triangles cut away behind each seam.
Cut triangles first
Cut the goose from a square cut twice on the diagonal and the sky from squares cut once, then sew. This keeps the long edge of the goose and the outside edges of the sky on the straight grain, but the short edges you sew are bias.
How much fabric each method uses
| Method | Fabric per goose | More than the finished unit |
|---|---|---|
| No-waste, four at a time | 15.2 sq in | 89% |
| Cut triangles first | 15.2 sq in | 89% |
| Stitch and flip | 23.8 sq in | 197% |
Area of fabric cut per finished goose, compared with the area of the finished unit. Stitch and flip costs the most because two squares are mostly cut away.
Cut sizes for common geese
| Finished | No-waste large | No-waste small | Flip rectangle | Flip squares |
|---|---|---|---|---|
| 1″ × 2″ | 3¼″ | 1⅞″ | 1½″ × 2½″ | 1½″ |
| 1½″ × 3″ | 4¼″ | 2⅜″ | 2″ × 3½″ | 2″ |
| 2″ × 4″ | 5¼″ | 2⅞″ | 2½″ × 4½″ | 2½″ |
| 2½″ × 5″ | 6¼″ | 3⅜″ | 3″ × 5½″ | 3″ |
| 3″ × 6″ | 7¼″ | 3⅞″ | 3½″ × 6½″ | 3½″ |
| 3½″ × 7″ | 8¼″ | 4⅜″ | 4″ × 7½″ | 4″ |
| 4″ × 8″ | 9¼″ | 4⅞″ | 4½″ × 8½″ | 4½″ |
| 4½″ × 9″ | 10¼″ | 5⅜″ | 5″ × 9½″ | 5″ |
| 5″ × 10″ | 11¼″ | 5⅞″ | 5½″ × 10½″ | 5½″ |
| 5½″ × 11″ | 12¼″ | 6⅜″ | 6″ × 11½″ | 6″ |
| 6″ × 12″ | 13¼″ | 6⅞″ | 6½″ × 12½″ | 6½″ |
Many quilters add an extra ⅛″ to both no-waste squares and trim the finished geese. The allowances above give exact units when every seam is a true ¼″.