Seam Quarter

Sawtooth Star quilt block

Sawtooth Star quilt block diagram
Sawtooth Star: 4 × 4 grid, 5 squares and 4 flying-geese units.

A centre square of fabric B and four corner squares of fabric A are joined by four flying-geese units that make the star points.

  • Fabric A background
  • Fabric B star points and centre

Cutting chart

For one 12″ finished block (12½″ with seam allowance). Change the size above for any other.

FabricCut
Fabric Abackground
  • 1 × 7¼″ squareno-waste method: 4 flying-geese units
  • 4 × 3½″ square
Fabric Bstar points and centre
  • 1 × 6½″ square
  • 4 × 3⅞″ squareno-waste sky squares, 4 per large square

Between 4″ and 24″ these finished sizes put every cut on a ⅛″ ruler line: 4″, 4½″, 5″, 5½″, 6″, 6½″, 7″, 7½″, 8″, 8½″, 9″, 9½″, 10″, 10½″, 11″, 11½″, 12″, 12½″, 13″, 13½″, 14″, 14½″, 15″, 15½″, 16″, 16½″, 17″, 17½″, 18″, 18½″, 19″, 19½″, 20″, 20½″, 21″, 21½″, 22″, 22½″, 23″, 23½″, 24″.

Yardage for a whole quilt

Finished quilt: 56″ × 68″ from 20 blocks. Batting at least 64″ × 76″.

FabricBuyStrips across the width
Fabric Abackground1¾ yd4 × 7¼″, 8 × 3½″ strips
Fabric Bstar points and centre1¾ yd4 × 6½″, 8 × 3⅞″ strips
Border⅞ yd6 strips 4½″ wide, joined end to end
Binding⅝ yd7 strips 2½″ wide (double-fold), 260″ joined
Backing (42″ fabric)3¾ yd2 panels 64″ long, 1 horizontal seam; backing 64″ × 76″

Yardage assumes 40″ of usable width, strips cut across the fabric, and 4″ for straightening, rounded up to the next ⅛ yard.

How it goes together

Sawtooth Star block pulled apart into its sewing rows
  1. Row 1: square, flying-geese unit, square.
  2. Row 2: flying-geese unit, square, flying-geese unit.
  3. Row 3: square, flying-geese unit, square.
  4. Sew the pieces of each row together, then join the 3 rows.

Printable templates

For hand piecing, or to check a rotary cut against paper: one full-size template for each different shape, with the cutting line solid and the sewing line dashed, at the size in the cutting chart.

Print at 100% (“Actual size”) and measure the 1″ test square before cutting.

Notes on sewing the Sawtooth Star

The star points and the centre share fabric B, so the star reads as a single shape against fabric A. Contrast between the two fabrics has to be strong, because the points are narrow and fade quickly into a similar background. The centre square is the largest piece of B and can carry a bolder or directional print. A dark background with light points turns the block into a night sky with little extra effort.

Repeated, the block makes a field of stars with the corner squares of fabric A joining into a plain grid between them. Alternating star blocks with plain squares gives the points room, and sashing with cornerstones in fabric B repeats the star colour across the quilt. A scrappy version, with different B fabrics in each block but a single A, keeps the stars together.

  • When joining a flying-geese unit to its neighbour, sew with the geese unit on top so you can see where its seams cross, and stitch a thread’s width outside that crossing to keep the star points sharp.
  • Press the flying-geese seams toward the small triangles, then press the rows toward the corner squares and centre in alternating directions so the crossings nest.
  • Turn all four flying-geese units so the large fabric A triangle points in toward the centre square. A unit turned the other way puts its pair of star points on the wrong side.
  • The no-waste method makes four geese from one set of squares. Square each unit to the same size afterwards, since small differences become obvious beside the corner squares.

More four-patch blocks