Seam Quarter

Pinwheel quilt block

Pinwheel quilt block diagram
Pinwheel: 2 × 2 grid, 4 half-square triangles.

Four half-square triangle units in two rows, each turned a quarter from its neighbour, so the blades of fabric B spin around the centre point.

  • Fabric A background
  • Fabric B blades

Cutting chart

For one 12″ finished block (12½″ with seam allowance). Change the size above for any other.

FabricCut
Fabric Abackground
  • 2 × 6⅞″ squarepair with fabric B: 4 HST units
Fabric Bblades
  • 2 × 6⅞″ squarepaired with fabric A

Every finished size in ¼″ steps cuts cleanly on ⅛″ ruler lines.

Yardage for a whole quilt

Finished quilt: 56″ × 68″ from 20 blocks. Batting at least 64″ × 76″.

FabricBuyStrips across the width
Fabric Abackground1¾ yd8 × 6⅞″ strips
Fabric Bblades1¾ yd8 × 6⅞″ strips
Border⅞ yd6 strips 4½″ wide, joined end to end
Binding⅝ yd7 strips 2½″ wide (double-fold), 260″ joined
Backing (42″ fabric)3¾ yd2 panels 64″ long, 1 horizontal seam; backing 64″ × 76″

Yardage assumes 40″ of usable width, strips cut across the fabric, and 4″ for straightening, rounded up to the next ⅛ yard.

How it goes together

Pinwheel block pulled apart into its sewing rows
  1. Row 1: half-square triangle, half-square triangle.
  2. Row 2: half-square triangle, half-square triangle.
  3. Sew the pieces of each row together, then join the 2 rows.

Printable templates

For hand piecing, or to check a rotary cut against paper: one full-size template for each different shape, with the cutting line solid and the sewing line dashed, at the size in the cutting chart.

Print at 100% (“Actual size”) and measure the 1″ test square before cutting.

Notes on sewing the Pinwheel

Fabric B makes the blades and fabric A the background between them, so the pinwheel depends on the difference between the two. If they are close in tone, the blades disappear and the block becomes a flat square with faint diagonal lines. Cutting each blade from a different fabric makes a scrappy pinwheel, while using a stripe for the blades emphasises the spin.

Repeated side by side, pinwheel blocks join corner to corner and build a field of spinning shapes, with new pinwheels often appearing at the junction of four blocks. Alternating them with plain squares gives a quieter quilt. Sashing with cornerstones separates each block, and setting them on point turns the spin diagonal.

  • Pin through the centre, where four points meet, before sewing the rows together. If the points are off, the pinwheel will look like it has a lump in the middle.
  • Press the two rows in opposite directions, then consider pressing the final centre seam open to reduce the bulk of eight layers at the middle.
  • Lay the four half-square triangle units around the centre before sewing. Every fabric B triangle should chase the next one in the same rotational direction.
  • Handle the half-square triangle units gently, since their long edges are on the bias. Sew with the diagonal seam on the top and avoid pulling the unit under the needle.

More four-patch blocks