Dutchman's Puzzle quilt block
Eight flying-geese units of fabric B on fabric A are sewn as four pairs and then joined in two rows, so every piece of the block is a triangle.
- Fabric A background
- Fabric B geese
Cutting chart
For one 12″ finished block (12½″ with seam allowance). Change the size above for any other.
| Fabric | Cut |
|---|---|
| Fabric Abackground |
|
| Fabric Bgeese |
|
Between 4″ and 24″ these finished sizes put every cut on a ⅛″ ruler line: 4″, 4½″, 5″, 5½″, 6″, 6½″, 7″, 7½″, 8″, 8½″, 9″, 9½″, 10″, 10½″, 11″, 11½″, 12″, 12½″, 13″, 13½″, 14″, 14½″, 15″, 15½″, 16″, 16½″, 17″, 17½″, 18″, 18½″, 19″, 19½″, 20″, 20½″, 21″, 21½″, 22″, 22½″, 23″, 23½″, 24″.
Yardage for a whole quilt
Finished quilt: 56″ × 68″ from 20 blocks. Batting at least 64″ × 76″.
| Fabric | Buy | Strips across the width |
|---|---|---|
| Fabric Abackground | 1⅞ yd | 16 × 3⅞″ strips |
| Fabric Bgeese | 1¾ yd | 8 × 7¼″ strips |
| Border | ⅞ yd | 6 strips 4½″ wide, joined end to end |
| Binding | ⅝ yd | 7 strips 2½″ wide (double-fold), 260″ joined |
| Backing (42″ fabric) | 3¾ yd | 2 panels 64″ long, 1 horizontal seam; backing 64″ × 76″ |
Yardage assumes 40″ of usable width, strips cut across the fabric, and 4″ for straightening, rounded up to the next ⅛ yard.
How it goes together
- Piece the 4 pairs of flying-geese units first.
- Row 1: pair of flying-geese units, pair of flying-geese units.
- Row 2: pair of flying-geese units, pair of flying-geese units.
- Sew the pieces of each row together, then join the 2 rows.
Printable templates
For hand piecing, or to check a rotary cut against paper: one full-size template for each different shape, with the cutting line solid and the sewing line dashed, at the size in the cutting chart.
Print at 100% (“Actual size”) and measure the 1″ test square before cutting.
Notes on sewing the Dutchman's Puzzle
Fabric B makes the geese and fabric A the sky between them. Because the block has no plain squares, all of its visual interest comes from the contrast between the two fabrics, and the geese lose their shape quickly when A and B are close in value. A single dark B on a pale A gives a bold, graphic block, while a scrappy B makes the geese look like a flock of different colours.
Repeated in a quilt, the geese from neighbouring blocks line up to make larger zigzag or sawtooth shapes across the surface, and the effect changes when blocks are rotated a quarter turn. Sashing separates the blocks and reduces the busy look, and alternate plain blocks give the eye somewhere to rest. The block is dense, so a plain background often works best.
- Sew each pair with the lower goose on top, so you can see the point of the goose beneath it, and stitch a thread’s width outside that point so the tip is not cut off.
- Both geese in a pair point the same way, and each pair sits a quarter turn from the one before. Check every pair against the diagram; one pair turned wrong breaks the spin.
- Press the seams of each pair toward the sky triangles, then press the joining seams so the centre crossing nests where four pairs meet.
- Square up each pair to the same size before joining. With eight units and no plain squares, every small difference accumulates and the outer edges stop lining up.