Square in a Square quilt block
A centre square of fabric B set on point and framed by four half-square triangles of fabric A makes one unit that is trimmed square at the end.
- Fabric A background
- Fabric B centre square
Cutting chart
For one 12″ finished block (12½″ with seam allowance). Change the size above for any other.
| Fabric | Cut |
|---|---|
| Fabric Abackground |
|
| Fabric Bcentre square |
|
No finished size cuts entirely on ruler lines: the on-point centre is the block size divided by √2. Cut that piece at the next ⅛″ up and trim the unit after piecing.
Yardage for a whole quilt
Finished quilt: 56″ × 68″ from 20 blocks. Batting at least 64″ × 76″.
| Fabric | Buy | Strips across the width |
|---|---|---|
| Fabric Abackground | 1¾ yd | 8 × 6⅞″ strips |
| Fabric Bcentre square | 1⅜ yd | 5 × ≈9″ strips |
| Border | ⅞ yd | 6 strips 4½″ wide, joined end to end |
| Binding | ⅝ yd | 7 strips 2½″ wide (double-fold), 260″ joined |
| Backing (42″ fabric) | 3¾ yd | 2 panels 64″ long, 1 horizontal seam; backing 64″ × 76″ |
Yardage assumes 40″ of usable width, strips cut across the fabric, and 4″ for straightening, rounded up to the next ⅛ yard.
How it goes together
- This block is one unit: make it and trim it square.
Printable templates
For hand piecing, or to check a rotary cut against paper: one full-size template for each different shape, with the cutting line solid and the sewing line dashed, at the size in the cutting chart.
Print at 100% (“Actual size”) and measure the 1″ test square before cutting.
Notes on sewing the Square in a Square
Fabric B is the centre and fabric A the frame, so the block depends on the difference between the two. A bold B against a quiet A creates a diamond that stands out, while close values make the centre blur into the triangles. A different fabric for each of the four frame triangles gives a pieced frame, and a directional print in the centre turns the diamond into a focal point.
Repeated, square-in-a-square blocks make a field of diamonds, with the triangles of fabric A from neighbouring blocks meeting at the edges to form larger shapes. Alternating them with plain squares or pieced blocks varies the rhythm. Set on point, the diamonds become squares again, and a scrappy version with a different B in each block makes a lively quilt.
- Sew triangles to two opposite sides of the centre square first, press, then add the remaining two. This order keeps the bias edges supported while they are sewn.
- The long edge of each fabric A triangle is on the bias, and it is the edge that is sewn. Handle the triangles by the straight edges and do not pull as you sew.
- Centre each triangle so equal tails overhang at both ends of the centre square. Uneven tails shift the diamond off centre and the unit will not trim square.
- Trim the unit square, leaving a quarter inch of fabric A beyond each corner of the fabric B square so the points of the diamond are not cut off.