Quilt size calculator
Blocks, sashing and borders decide the finished size; the finished size decides the binding, backing and batting. Fill in the layout to get all of them, or start from the mattress chart below to choose a layout.
Finished quilt: 68″ × 80″ from 30 blocks. Batting at least 76″ × 88″.
| Buy | Detail | |
|---|---|---|
| Border | 1⅛ yd | 8 strips 4½″ wide, joined end to end |
| Binding | ¾ yd | 9 strips 2½″ wide (double-fold), 308″ joined |
| Backing (42″ fabric) | 5 yd | 2 panels 88″ long, 1 vertical seam; backing 76″ × 88″ |
Mattress sizes and the quilt that covers them
A quilt that hangs over the sides needs the mattress width plus the drop on both sides, and the length plus the drop at the foot and a pillow tuck at the head. Change the drop and tuck above; 12″ covers a standard mattress and 15″ to 18″ reaches further down a deep one.
| Mattress | Mattress size | Quilt with 12″ drop |
|---|---|---|
| Twin | 38″ × 75″ | 62″ × 97″ |
| Twin XL | 38″ × 80″ | 62″ × 102″ |
| Full | 54″ × 75″ | 78″ × 97″ |
| Queen | 60″ × 80″ | 84″ × 102″ |
| King | 76″ × 80″ | 100″ × 102″ |
| California king | 72″ × 84″ | 96″ × 106″ |
How the numbers are worked out
Finished width is the blocks across times the block size, plus the sashing between them, plus each border twice. Borders go on the sides first, then the top and bottom, so the top and bottom strips are longer by two border widths. Strips are cut across a 40″ usable width and joined end to end. Binding is the perimeter plus 12″ for the corners and the final join. Backing is the quilt plus 4″ on every side, which most longarm quilters ask for; batting is the same size as the backing.
To work backwards from a target size, divide the width you want (less the borders) by the block size and round to a whole number of blocks, then adjust the border to make up the difference.