Seam Quarter

Double Four Patch quilt block

Double Four Patch quilt block diagram
Double Four Patch: 4 × 4 grid, 10 squares.

Two small four-patch units sit diagonally opposite two large squares of fabric C, so the block reads as a checkerboard with one busy pair and one calm pair.

  • Fabric A background
  • Fabric B dark squares
  • Fabric C large squares

Cutting chart

For one 12″ finished block (12½″ with seam allowance). Change the size above for any other.

FabricCut
Fabric Abackground
  • 4 × 3½″ square
Fabric Bdark squares
  • 4 × 3½″ square
Fabric Clarge squares
  • 2 × 6½″ square

Between 4″ and 24″ these finished sizes put every cut on a ⅛″ ruler line: 4″, 4½″, 5″, 5½″, 6″, 6½″, 7″, 7½″, 8″, 8½″, 9″, 9½″, 10″, 10½″, 11″, 11½″, 12″, 12½″, 13″, 13½″, 14″, 14½″, 15″, 15½″, 16″, 16½″, 17″, 17½″, 18″, 18½″, 19″, 19½″, 20″, 20½″, 21″, 21½″, 22″, 22½″, 23″, 23½″, 24″.

Yardage for a whole quilt

Finished quilt: 56″ × 68″ from 20 blocks. Batting at least 64″ × 76″.

FabricBuyStrips across the width
Fabric Abackground1 yd8 × 3½″ strips
Fabric Bdark squares1 yd8 × 3½″ strips
Fabric Clarge squares1⅜ yd7 × 6½″ strips
Border⅞ yd6 strips 4½″ wide, joined end to end
Binding⅝ yd7 strips 2½″ wide (double-fold), 260″ joined
Backing (42″ fabric)3¾ yd2 panels 64″ long, 1 horizontal seam; backing 64″ × 76″

Yardage assumes 40″ of usable width, strips cut across the fabric, and 4″ for straightening, rounded up to the next ⅛ yard.

How it goes together

Double Four Patch block pulled apart into its sewing rows
  1. Piece the 2 four-patch units first.
  2. Row 1: four-patch unit, square.
  3. Row 2: square, four-patch unit.
  4. Sew the pieces of each row together, then join the 2 rows.

Printable templates

For hand piecing, or to check a rotary cut against paper: one full-size template for each different shape, with the cutting line solid and the sewing line dashed, at the size in the cutting chart.

Print at 100% (“Actual size”) and measure the 1″ test square before cutting.

Notes on sewing the Double Four Patch

Fabrics A and B make the small squares inside the four-patch units, and fabric C fills the two large squares. The large squares work best in a quiet fabric such as a solid, a tone-on-tone or a soft print that lets the little squares sparkle. If C competes with B in value, the units lose their definition and the block turns muddy. Choosing C close to A in value makes the four-patch units stand out like islands on a plain ground.

Set edge to edge, the block creates alternating busy and plain areas, with the four-patch units meeting corner to corner across the quilt. Turning every other block a quarter turn changes the diagonal direction and breaks the checkerboard into a larger lattice. A scrappy version with a new pair of small squares in each unit keeps the large squares as a steady resting place for the eye.

  • Piece the two four-patch units first and press each unit’s seams in opposite directions, so the centre crossing locks flat before the unit meets the large squares.
  • Measure each finished four-patch unit against a large fabric C square. A unit that comes out slightly small is the usual reason the two rows refuse to line up.
  • Press the seams that join units to large squares toward fabric C, so the already busy four-patch seams are not doubled up at the join.
  • Sew both four-patch units with the fabric A and fabric B squares in the same positions. Reversing one unit swaps its checkerboard and puts matching colours side by side.

More four-patch blocks