Seam Quarter

Four Patch quilt block

Four Patch quilt block diagram
Four Patch: 2 × 2 grid, 4 squares.

Four squares in two rows, two cut from fabric A and two from fabric B, so the only challenge in the whole block is a single crossing seam.

  • Fabric A background
  • Fabric B dark squares

Cutting chart

For one 12″ finished block (12½″ with seam allowance). Change the size above for any other.

FabricCut
Fabric Abackground
  • 2 × 6½″ square
Fabric Bdark squares
  • 2 × 6½″ square

Every finished size in ¼″ steps cuts cleanly on ⅛″ ruler lines.

Yardage for a whole quilt

Finished quilt: 56″ × 68″ from 20 blocks. Batting at least 64″ × 76″.

FabricBuyStrips across the width
Fabric Abackground1⅜ yd7 × 6½″ strips
Fabric Bdark squares1⅜ yd7 × 6½″ strips
Border⅞ yd6 strips 4½″ wide, joined end to end
Binding⅝ yd7 strips 2½″ wide (double-fold), 260″ joined
Backing (42″ fabric)3¾ yd2 panels 64″ long, 1 horizontal seam; backing 64″ × 76″

Yardage assumes 40″ of usable width, strips cut across the fabric, and 4″ for straightening, rounded up to the next ⅛ yard.

How it goes together

Four Patch block pulled apart into its sewing rows
  1. Row 1: square, square.
  2. Row 2: square, square.
  3. Sew the pieces of each row together, then join the 2 rows.

Printable templates

For hand piecing, or to check a rotary cut against paper: one full-size template for each different shape, with the cutting line solid and the sewing line dashed, at the size in the cutting chart.

Print at 100% (“Actual size”) and measure the 1″ test square before cutting.

Notes on sewing the Four Patch

Fabric A is the background and fabric B the dark squares, so the block is purely a test of value. If the two fabrics sit close together in tone, the four squares blur into one flat patch and the grid disappears. Placing the dark squares diagonally gives a checkerboard feel, while placing them side by side makes a bar across the block. Using a different print for each square turns the same cutting list into a scrappy study in small contrasts.

Repeated edge to edge, the block builds a checkerboard at a larger scale, and when the dark squares meet at the corners of neighbouring blocks they form a diagonal chain across the quilt. Alternating it with plain squares of fabric A gives the dark squares room to read. It also works as a building unit, since four-patch units become the corners or centres of bigger blocks.

  • Press the seam of row 1 one way and the seam of row 2 the other, so the two seams butt against each other when the rows are joined.
  • Pin straight through the crossing before joining the rows. With only four squares there is nowhere to hide a shifted centre, so check from the front that the corners meet.
  • Chain-piece every first-row pair, then every second-row pair, before pressing. This keeps the opposing pressing directions consistent across a stack of blocks.
  • Cut all the fabric A and fabric B squares from the same strip or the same ruler setting; a small variation in four pieces shows at the outer edges.

More four-patch blocks