Seam Quarter

Double Nine Patch quilt block

Double Nine Patch quilt block diagram
Double Nine Patch: 9 × 9 grid, 49 squares.

Five small nine-patch units alternate with four large squares of fabric A in a three-by-three layout, making a nine-patch built from nine-patches.

  • Fabric A background
  • Fabric B small dark squares

Cutting chart

For one 13½″ finished block (14″ with seam allowance). Change the size above for any other.

FabricCut
Fabric Abackground
  • 4 × 5″ square
  • 20 × 2″ square
Fabric Bsmall dark squares
  • 25 × 2″ square

Between 4″ and 24″ these finished sizes put every cut on a ⅛″ ruler line: 4½″, 6¾″, 9″, 11¼″, 13½″, 15¾″, 18″, 20¼″, 22½″.

Yardage for a whole quilt

Finished quilt: 62″ × 75½″ from 20 blocks. Batting at least 70″ × 84″.

FabricBuyStrips across the width
Fabric Abackground2⅝ yd10 × 5″, 20 × 2″ strips
Fabric Bsmall dark squares1½ yd25 × 2″ strips
Border1 yd7 strips 4½″ wide, joined end to end
Binding¾ yd8 strips 2½″ wide (double-fold), 287″ joined
Backing (42″ fabric)4¾ yd2 panels 84″ long, 1 vertical seam; backing 70″ × 84″

Yardage assumes 40″ of usable width, strips cut across the fabric, and 4″ for straightening, rounded up to the next ⅛ yard.

How it goes together

Double Nine Patch block pulled apart into its sewing rows
  1. Piece the 5 nine-patch units first.
  2. Row 1: nine-patch unit, square, nine-patch unit.
  3. Row 2: square, nine-patch unit, square.
  4. Row 3: nine-patch unit, square, nine-patch unit.
  5. Sew the pieces of each row together, then join the 3 rows.

Printable templates

For hand piecing, or to check a rotary cut against paper: one full-size template for each different shape, with the cutting line solid and the sewing line dashed, at the size in the cutting chart.

Print at 100% (“Actual size”) and measure the 1″ test square before cutting.

Notes on sewing the Double Nine Patch

The dark squares of fabric B appear only inside the five small units, while the large squares are plain fabric A. That separation is the point of the block: the small checkerboards read as little islands. If B is close to A in value, the islands fade and only the layout is left. A different fabric B in each unit makes the block scrappy without losing its structure.

Repeated in a quilt, the checkerboard units meet at the corners of neighbouring blocks and form chains of small dark squares that cross the surface diagonally. The large plain squares are a good place to show off quilting. Sashing between blocks spreads the pattern out, and setting the blocks on point shifts the chains into a different diagonal.

  • Piece the five small nine-patch units first. Press the rows so that the seams nest, then measure each unit; they must all match, as the large squares are cut to the same size.
  • Forty-five small squares means a lot of seams, so check the quarter inch allowance on a test seam before starting. Small errors multiply across the unit.
  • Press the seams that join a unit to a large square toward the large square, to keep the bulk of the nine-patch seams flat.
  • Keep fabric B in the corners and centre of every unit. A single unit sewn the other way round turns its dark squares into a cross and breaks the pattern.

More nine-patch blocks