Seam Quarter

Snowball quilt block

Snowball quilt block diagram
Snowball: 3 × 3 grid, 1 snowball unit.

One large square of fabric B with a corner of fabric A sewn onto each corner by stitch-and-flip, so the block has no seams except the four diagonal lines.

  • Fabric A background
  • Fabric B snowball

Cutting chart

For one 12″ finished block (12½″ with seam allowance). Change the size above for any other.

FabricCut
Fabric Abackground
  • 4 × 4½″ squarestitch-and-flip corners
Fabric Bsnowball
  • 1 × 12½″ square

Between 4″ and 24″ these finished sizes put every cut on a ⅛″ ruler line: 4½″, 5¼″, 6″, 6¾″, 7½″, 8¼″, 9″, 9¾″, 10½″, 11¼″, 12″, 12¾″, 13½″, 14¼″, 15″, 15¾″, 16½″, 17¼″, 18″, 18¾″, 19½″, 20¼″, 21″, 21¾″, 22½″, 23¼″, 24″.

Yardage for a whole quilt

Finished quilt: 56″ × 68″ from 20 blocks. Batting at least 64″ × 76″.

FabricBuyStrips across the width
Fabric Abackground1⅜ yd10 × 4½″ strips
Fabric Bsnowball2⅝ yd7 × 12½″ strips
Border⅞ yd6 strips 4½″ wide, joined end to end
Binding⅝ yd7 strips 2½″ wide (double-fold), 260″ joined
Backing (42″ fabric)3¾ yd2 panels 64″ long, 1 horizontal seam; backing 64″ × 76″

Yardage assumes 40″ of usable width, strips cut across the fabric, and 4″ for straightening, rounded up to the next ⅛ yard.

How it goes together

Snowball block pulled apart into its sewing rows
  1. This block is one unit: make it and trim it square.

Printable templates

For hand piecing, or to check a rotary cut against paper: one full-size template for each different shape, with the cutting line solid and the sewing line dashed, at the size in the cutting chart.

Print at 100% (“Actual size”) and measure the 1″ test square before cutting.

Notes on sewing the Snowball

Fabric B is the large square and fabric A takes the four corners, which gives an octagon in B on a square of A. The shape only shows when the two fabrics contrast, and with a close match the corners seem to be missing. A busy print for B and a quiet fabric for A highlights the octagon, while a solid B and patterned A turns the corners into the decoration.

Placed side by side, the A corners of four neighbouring blocks meet and form a small square on point between the octagons. Alternating snowball blocks with pieced blocks of the same size is a common way to calm the surface, and a scrappy version with different A fabrics at each corner turns the diamonds into a pattern of their own.

  • Draw the diagonal line on the wrong side of each fabric A square before sewing. Stitching exactly on the line gives a corner that lies flat when flipped.
  • Sew on the line, flip the corner open, press, and check that its outer edges line up with the large square. Trim the excess behind the seam if the corners feel bulky.
  • Position each fabric A square with its corner exactly on the corner of the fabric B square. A small slip tilts the finished corner and shows once the block is trimmed.
  • Trim the finished block square before use. Stitch-and-flip corners can pull the large square slightly out of true, and a trimmed block joins cleanly with its neighbours.

More nine-patch blocks