Seam Quarter

Shoo Fly quilt block

Shoo Fly quilt block diagram
Shoo Fly: 3 × 3 grid, 4 half-square triangles and 5 squares.

Four half-square triangle corners and four fabric A squares surround a centre square of fabric B, a plain three-by-three block where the corner triangles do all the visual work.

  • Fabric A background
  • Fabric B corners and centre

Cutting chart

For one 12″ finished block (12½″ with seam allowance). Change the size above for any other.

FabricCut
Fabric Abackground
  • 2 × 4⅞″ squarepair with fabric B: 4 HST units
  • 4 × 4½″ square
Fabric Bcorners and centre
  • 2 × 4⅞″ squarepaired with fabric A
  • 1 × 4½″ square

Between 4″ and 24″ these finished sizes put every cut on a ⅛″ ruler line: 4½″, 5¼″, 6″, 6¾″, 7½″, 8¼″, 9″, 9¾″, 10½″, 11¼″, 12″, 12¾″, 13½″, 14¼″, 15″, 15¾″, 16½″, 17¼″, 18″, 18¾″, 19½″, 20¼″, 21″, 21¾″, 22½″, 23¼″, 24″.

Yardage for a whole quilt

Finished quilt: 56″ × 68″ from 20 blocks. Batting at least 64″ × 76″.

FabricBuyStrips across the width
Fabric Abackground2⅛ yd5 × 4⅞″, 10 × 4½″ strips
Fabric Bcorners and centre1¼ yd5 × 4⅞″, 3 × 4½″ strips
Border⅞ yd6 strips 4½″ wide, joined end to end
Binding⅝ yd7 strips 2½″ wide (double-fold), 260″ joined
Backing (42″ fabric)3¾ yd2 panels 64″ long, 1 horizontal seam; backing 64″ × 76″

Yardage assumes 40″ of usable width, strips cut across the fabric, and 4″ for straightening, rounded up to the next ⅛ yard.

How it goes together

Shoo Fly block pulled apart into its sewing rows
  1. Row 1: half-square triangle, square, half-square triangle.
  2. Row 2: square, square, square.
  3. Row 3: half-square triangle, square, half-square triangle.
  4. Sew the pieces of each row together, then join the 3 rows.

Printable templates

For hand piecing, or to check a rotary cut against paper: one full-size template for each different shape, with the cutting line solid and the sewing line dashed, at the size in the cutting chart.

Print at 100% (“Actual size”) and measure the 1″ test square before cutting.

Notes on sewing the Shoo Fly

Fabric B appears in the centre and in the corner triangles, so it forms a pattern of dark at the middle and at the four corners, divided by the plain fabric A. When the two fabrics are close in tone, the corners fade and the block looks like a square with a blotch in the middle. A bold B in the centre alone, or in the corners alone, gives a simpler look.

Where four blocks meet, the corner triangles of fabric B join into a larger shape across the seam intersection, which becomes a second pattern in the repeat. Alternating the block with plain squares of fabric A isolates each one, while sashing in a third fabric gives each block its own frame. It makes a good partner for other three-by-three blocks in a sampler.

  • Press rows 1 and 3 toward the half-square triangles and row 2 toward the centre square. This makes the seams oppose at every crossing.
  • Sew each half-square triangle with fabric B on the outer corner, as the diagram shows. Mixing the direction of even one unit puts a light corner where a dark one belongs.
  • The diagonal seam of every half-square triangle is on the bias, so press, never drag, and support the unit when moving it between machine and iron.
  • Cut the four fabric A squares from the same strip as the fabric A half-square triangle squares where possible, so the background is one consistent grain and shade.

More nine-patch blocks