Seam Quarter

Bear's Paw quilt block

Bear's Paw quilt block diagram
Bear's Paw: 7 × 7 grid, 9 squares, 16 half-square triangles and 4 rectangles.

Four paw sections built from half-square triangles and squares sit in the corners, joined by rectangles of fabric A around a centre square of fabric C in a seven-patch grid.

  • Fabric A background
  • Fabric B paws
  • Fabric C centre square

Cutting chart

For one 10½″ finished block (11″ with seam allowance). Change the size above for any other.

FabricCut
Fabric Abackground
  • 4 × 2″ × 5″
  • 8 × 2⅜″ squarepair with fabric B: 16 HST units
  • 4 × 2″ square
Fabric Bpaws
  • 4 × 3½″ square
  • 8 × 2⅜″ squarepaired with fabric A
Fabric Ccentre square
  • 1 × 2″ square

Between 4″ and 24″ these finished sizes put every cut on a ⅛″ ruler line: 5¼″, 7″, 8¾″, 10½″, 12¼″, 14″, 15¾″, 17½″, 19¼″, 21″, 22¾″.

Yardage for a whole quilt

Finished quilt: 50″ × 60½″ from 20 blocks. Batting at least 58″ × 69″.

FabricBuyStrips across the width
Fabric Abackground1⅝ yd10 × 2⅜″, 14 × 2″ strips
Fabric Bpaws1⅝ yd8 × 3½″, 10 × 2⅜″ strips
Fabric Ccentre square¼ yd1 × 2″ strips
Border⅞ yd6 strips 4½″ wide, joined end to end
Binding⅝ yd7 strips 2½″ wide (double-fold), 233″ joined
Backing (42″ fabric)3⅜ yd2 panels 58″ long, 1 horizontal seam; backing 58″ × 69″

Yardage assumes 40″ of usable width, strips cut across the fabric, and 4″ for straightening, rounded up to the next ⅛ yard.

How it goes together

Bear's Paw block pulled apart into its sewing rows
  1. Piece the 4 paw sections first.
  2. Row 1: paw section, rectangle, paw section.
  3. Row 2: rectangle, square, rectangle.
  4. Row 3: paw section, rectangle, paw section.
  5. Sew the pieces of each row together, then join the 3 rows.

Printable templates

For hand piecing, or to check a rotary cut against paper: one full-size template for each different shape, with the cutting line solid and the sewing line dashed, at the size in the cutting chart.

Print at 100% (“Actual size”) and measure the 1″ test square before cutting.

Notes on sewing the Bear's Paw

Fabric B forms the paws and fabric A the background, while fabric C marks the centre. The paws need strong contrast with A to look like claws and not like clutter, and the centre square is the place for a small accent or a quieter print. If B and A are close in tone, the half-square triangles disappear and the corners turn into shapeless texture.

Repeated, the paws point toward each other from block to block, forming a larger pattern of paws and plain rectangles. The block is busy, so plain alternate squares or wide sashing help it breathe. Turning alternate blocks a quarter turn changes how the claws line up, and a scrappy B with a single A keeps the quilt unified.

  • Make the four paw sections first and measure each one. They must all be the same size, because the rectangles and centre square are cut to fit between them.
  • Check the direction of the half-square triangles in every paw section against the diagram. A single reversed triangle changes the claw and is hard to unpick once the sections are joined.
  • Press the seams inside each paw section toward the larger fabric B square, and press the rows so the seams oppose where the sections meet the rectangles.
  • Pieces here are small, so use a precise quarter inch and consider the trimmed method for the half-square triangles. Oversize and trim each one rather than relying on exact cutting.