Jacob's Ladder quilt block
Five four-patch units and four half-square triangle units alternate in a three-by-three layout, and the ladder pattern comes from how the light and dark squares line up.
- Fabric A background
- Fabric B dark
Cutting chart
For one 12″ finished block (12½″ with seam allowance). Change the size above for any other.
| Fabric | Cut |
|---|---|
| Fabric Abackground |
|
| Fabric Bdark |
|
Between 4″ and 24″ these finished sizes put every cut on a ⅛″ ruler line: 4½″, 5¼″, 6″, 6¾″, 7½″, 8¼″, 9″, 9¾″, 10½″, 11¼″, 12″, 12¾″, 13½″, 14¼″, 15″, 15¾″, 16½″, 17¼″, 18″, 18¾″, 19½″, 20¼″, 21″, 21¾″, 22½″, 23¼″, 24″.
Yardage for a whole quilt
Finished quilt: 56″ × 68″ from 20 blocks. Batting at least 64″ × 76″.
| Fabric | Buy | Strips across the width |
|---|---|---|
| Fabric Abackground | 1¾ yd | 5 × 4⅞″, 13 × 2½″ strips |
| Fabric Bdark | 1¾ yd | 5 × 4⅞″, 13 × 2½″ strips |
| Border | ⅞ yd | 6 strips 4½″ wide, joined end to end |
| Binding | ⅝ yd | 7 strips 2½″ wide (double-fold), 260″ joined |
| Backing (42″ fabric) | 3¾ yd | 2 panels 64″ long, 1 horizontal seam; backing 64″ × 76″ |
Yardage assumes 40″ of usable width, strips cut across the fabric, and 4″ for straightening, rounded up to the next ⅛ yard.
How it goes together
- Piece the 5 four-patch units first.
- Row 1: four-patch unit, half-square triangle, four-patch unit.
- Row 2: half-square triangle, four-patch unit, half-square triangle.
- Row 3: four-patch unit, half-square triangle, four-patch unit.
- Sew the pieces of each row together, then join the 3 rows.
Printable templates
For hand piecing, or to check a rotary cut against paper: one full-size template for each different shape, with the cutting line solid and the sewing line dashed, at the size in the cutting chart.
Print at 100% (“Actual size”) and measure the 1″ test square before cutting.
Notes on sewing the Jacob's Ladder
Fabric A and fabric B appear in both the four-patch units and the triangles, so the ladder steps only show when the lights and darks are clearly separated. When they are close in tone, the diagonal path of squares disappears and the block looks like a patchwork of small checks. A scrappy version with many darks and many lights still works, as long as every light stays lighter than every dark.
Repeated, the blocks connect into long diagonal chains of dark squares that run across the quilt in steps. Turning alternate blocks a quarter turn changes the direction of the steps and can produce a zigzag. Plain sashing gives each ladder its own frame, and a single background fabric A with scrappy B squares ties a varied quilt together.
- Make all five four-patch units first, pressing the seams in each unit in opposite directions so the centre crossings nest. Every unit should come out the same size.
- Match the orientation of every four-patch unit to the diagram. A unit turned a quarter turn puts its dark squares on the wrong diagonal and breaks the ladder.
- Measure a four-patch unit against a half-square triangle unit before sewing rows. They should be the same size; trim the larger if they are not.
- Press rows 1 and 3 outward toward their four-patch units and row 2 inward toward its centre four-patch unit, so the seams oppose when the rows join.