Card Trick quilt block
Fabric A is the background and four fabrics, B to E, each supply one card, built from half-square, three-triangle and four-triangle units in a three-by-three layout.
- Fabric A background
- Fabric B card 1
- Fabric C card 2
- Fabric D card 3
- Fabric E card 4
Cutting chart
For one 12″ finished block (12½″ with seam allowance). Change the size above for any other.
| Fabric | Cut |
|---|---|
| Fabric Abackground |
|
| Fabric Bcard 1 |
|
| Fabric Ccard 2 |
|
| Fabric Dcard 3 |
|
| Fabric Ecard 4 |
|
Between 4″ and 24″ these finished sizes put every cut on a ⅛″ ruler line: 4½″, 5¼″, 6″, 6¾″, 7½″, 8¼″, 9″, 9¾″, 10½″, 11¼″, 12″, 12¾″, 13½″, 14¼″, 15″, 15¾″, 16½″, 17¼″, 18″, 18¾″, 19½″, 20¼″, 21″, 21¾″, 22½″, 23¼″, 24″.
Yardage for a whole quilt
Finished quilt: 56″ × 68″ from 20 blocks. Batting at least 64″ × 76″.
| Fabric | Buy | Strips across the width |
|---|---|---|
| Fabric Abackground | 1¼ yd | 3 × 5¼″, 5 × 4⅞″ strips |
| Fabric Bcard 1 | ⅞ yd | 2 × 5¼″, 3 × 4⅞″ strips |
| Fabric Ccard 2 | ⅞ yd | 2 × 5¼″, 3 × 4⅞″ strips |
| Fabric Dcard 3 | ⅞ yd | 2 × 5¼″, 3 × 4⅞″ strips |
| Fabric Ecard 4 | ⅞ yd | 2 × 5¼″, 3 × 4⅞″ strips |
| Border | ⅞ yd | 6 strips 4½″ wide, joined end to end |
| Binding | ⅝ yd | 7 strips 2½″ wide (double-fold), 260″ joined |
| Backing (42″ fabric) | 3¾ yd | 2 panels 64″ long, 1 horizontal seam; backing 64″ × 76″ |
Yardage assumes 40″ of usable width, strips cut across the fabric, and 4″ for straightening, rounded up to the next ⅛ yard.
How it goes together
- Row 1: half-square triangle, three-triangle unit, half-square triangle.
- Row 2: three-triangle unit, four-triangle unit, three-triangle unit.
- Row 3: half-square triangle, three-triangle unit, half-square triangle.
- Sew the pieces of each row together, then join the 3 rows.
Printable templates
For hand piecing, or to check a rotary cut against paper: one full-size template for each different shape, with the cutting line solid and the sewing line dashed, at the size in the cutting chart.
Print at 100% (“Actual size”) and measure the 1″ test square before cutting.
Notes on sewing the Card Trick
Each of the four card fabrics must contrast with the background A and also be distinct from the others, or the cards merge into a muddy centre. A mix of two light and two dark cards gives a lively block, while four fabrics of the same value makes a quieter one. Keeping the placement of the colours consistent from block to block is what makes the effect read across the quilt.
Repeated in a quilt, the block builds a field of cards that appear to fold around the centre of each block. Alternating blocks with plain squares of fabric A gives each one room, and setting the four colours in a rotating order across blocks creates a secondary pattern. Scrappy sets using the same placement of light and dark in every block look more ordered.
- Cut the quarter-square triangles carefully: their short sides are on the bias, so the pieces stretch easily. Handle them by the long side and press gently.
- Sew the four-triangle centre unit first and check it is square. Its seams meet at the middle of the block, and any error there shows in every surrounding unit.
- Label each fabric with a pin or sticky note on the design wall. With five fabrics and three kinds of unit, swapping two cards is the easiest mistake to make.
- Build each three-triangle unit by joining its two small triangles first, then adding the large triangle; nest the seams at every crossing before pinning the rows together.