Seam Quarter

Bow Tie quilt block

Bow Tie quilt block diagram
Bow Tie: 2 × 2 grid, 2 squares and 2 corner-triangle units.

Two plain squares and two corner-triangle units sit in a two-by-two grid, with stitch-and-flip corners of fabric B forming the knot of the bow tie across the centre.

  • Fabric A background
  • Fabric B tie

Cutting chart

For one 12″ finished block (12½″ with seam allowance). Change the size above for any other.

FabricCut
Fabric Abackground
  • 2 × 6½″ square
Fabric Btie
  • 2 × 6½″ square
  • 2 × 3½″ squarestitch-and-flip corners

Between 4″ and 24″ these finished sizes put every cut on a ⅛″ ruler line: 4″, 4½″, 5″, 5½″, 6″, 6½″, 7″, 7½″, 8″, 8½″, 9″, 9½″, 10″, 10½″, 11″, 11½″, 12″, 12½″, 13″, 13½″, 14″, 14½″, 15″, 15½″, 16″, 16½″, 17″, 17½″, 18″, 18½″, 19″, 19½″, 20″, 20½″, 21″, 21½″, 22″, 22½″, 23″, 23½″, 24″.

Yardage for a whole quilt

Finished quilt: 56″ × 68″ from 20 blocks. Batting at least 64″ × 76″.

FabricBuyStrips across the width
Fabric Abackground1⅜ yd7 × 6½″ strips
Fabric Btie1⅞ yd7 × 6½″, 4 × 3½″ strips
Border⅞ yd6 strips 4½″ wide, joined end to end
Binding⅝ yd7 strips 2½″ wide (double-fold), 260″ joined
Backing (42″ fabric)3¾ yd2 panels 64″ long, 1 horizontal seam; backing 64″ × 76″

Yardage assumes 40″ of usable width, strips cut across the fabric, and 4″ for straightening, rounded up to the next ⅛ yard.

How it goes together

Bow Tie block pulled apart into its sewing rows
  1. Row 1: square, corner-triangle unit.
  2. Row 2: corner-triangle unit, square.
  3. Sew the pieces of each row together, then join the 2 rows.

Printable templates

For hand piecing, or to check a rotary cut against paper: one full-size template for each different shape, with the cutting line solid and the sewing line dashed, at the size in the cutting chart.

Print at 100% (“Actual size”) and measure the 1″ test square before cutting.

Notes on sewing the Bow Tie

Fabric B is the tie and fabric A the background, so the knot at the centre only appears when the two contrast. If they are close in tone, the corner triangles blur into the squares and the bow tie vanishes. A directional print for the tie can add movement, while using a different background fabric in each block makes a scrappy quilt that still reads clearly because the ties stay constant.

Repeated across a quilt, bow ties line up in rows or turn to face one another, and a quarter turn between blocks changes the direction of the knots. Sashing separates them cleanly, and alternating the block with plain squares of fabric A gives each tie some space. Scrappy ties on a single background are a straightforward way to use up leftover fabric.

  • Place each small fabric B square on the corner of the background square that will meet the centre of the block, as in the diagram. On any other corner the knot does not form.
  • Flip the corner open, press toward the triangle, and check that its edges align with the square beneath before trimming away the excess fabric behind the seam.
  • Place the two corner-triangle units on opposite diagonals in the final layout. Putting both in the same row produces a block that looks like a stripe, not a bow tie.
  • Press row 1 toward one square and row 2 toward the other, so the seams oppose when the rows are joined and the centre crossing sits flat.

More four-patch blocks