Rail Fence quilt block
Three long strips sewn side by side make a striped square, and the block only turns into a zigzag when neighbouring blocks are rotated a quarter turn.
- Fabric A strip 1
- Fabric B strip 2
- Fabric C strip 3
Cutting chart
For one 12″ finished block (12½″ with seam allowance). Change the size above for any other.
| Fabric | Cut |
|---|---|
| Fabric Astrip 1 |
|
| Fabric Bstrip 2 |
|
| Fabric Cstrip 3 |
|
Between 4″ and 24″ these finished sizes put every cut on a ⅛″ ruler line: 4½″, 5¼″, 6″, 6¾″, 7½″, 8¼″, 9″, 9¾″, 10½″, 11¼″, 12″, 12¾″, 13½″, 14¼″, 15″, 15¾″, 16½″, 17¼″, 18″, 18¾″, 19½″, 20¼″, 21″, 21¾″, 22½″, 23¼″, 24″.
Yardage for a whole quilt
Finished quilt: 56″ × 68″ from 20 blocks. Batting at least 64″ × 76″.
| Fabric | Buy | Strips across the width |
|---|---|---|
| Fabric Astrip 1 | 1 yd | 7 × 4½″ strips |
| Fabric Bstrip 2 | 1 yd | 7 × 4½″ strips |
| Fabric Cstrip 3 | 1 yd | 7 × 4½″ strips |
| Border | ⅞ yd | 6 strips 4½″ wide, joined end to end |
| Binding | ⅝ yd | 7 strips 2½″ wide (double-fold), 260″ joined |
| Backing (42″ fabric) | 3¾ yd | 2 panels 64″ long, 1 horizontal seam; backing 64″ × 76″ |
Yardage assumes 40″ of usable width, strips cut across the fabric, and 4″ for straightening, rounded up to the next ⅛ yard.
How it goes together
- Sew the three strips together along their long edges; press toward the darkest strip.
- For many blocks, sew full-width strips into a strip set first and cut it into squares the finished block size plus ½″.
- In the quilt, turn every other block a quarter turn; that alternation is what makes the zigzag.
Printable templates
For hand piecing, or to check a rotary cut against paper: one full-size template for each different shape, with the cutting line solid and the sewing line dashed, at the size in the cutting chart.
Print at 100% (“Actual size”) and measure the 1″ test square before cutting.
Notes on sewing the Rail Fence
Fabrics A, B and C run in order across the block, so the arrangement of value matters more than hue. A step from light to dark gives a clear gradient, while a dark strip in the middle makes a banded look. If neighbouring strips are close in tone, the stripes blur. A different fabric in each position of the three, repeated across blocks, keeps the pattern strong.
On its own, the block is a plain stripe, but turning every other block a quarter turn creates a woven zigzag across the quilt. Setting all the blocks in the same direction produces simple stripes instead, and groups of four turned blocks give pinwheel-like shapes. A scrappy version with many strips of varied fabric is a quick way to use a stash.
- Sew the three strips together along their long edges and press toward the darkest strip, so the seams do not show through the lighter fabrics.
- For many blocks, sew full-width strips into a strip set and cut it into squares. Check the width of the strip set before cutting, since every block depends on it.
- Sew the strips in alternating directions along the strip set, one seam from top to bottom and the next from bottom to top. This stops the set from bowing into a curve.
- Lay the blocks out and turn every other one a quarter turn before joining. Check the diagram, since a block sewn with the strips running the wrong way breaks the zigzag.