Seam Quarter

Log Cabin quilt block

Log Cabin quilt block diagram
Log Cabin: 8 × 8 grid, 1 square and 12 rectangles.

A centre square of fabric C is wrapped in clockwise rounds of logs, light fabric A on two sides and dark fabric B on the others, three rounds in all.

  • Fabric A light logs
  • Fabric B dark logs
  • Fabric C centre square

Cutting chart

For one 12″ finished block (12½″ with seam allowance). Change the size above for any other.

FabricCut
Fabric Alight logs
  • 1 × 2″ × 11″
  • 1 × 2″ × 9½″
  • 1 × 2″ × 8″
  • 1 × 2″ × 6½″
  • 1 × 2″ × 5″
  • 1 × 2″ × 3½″
Fabric Bdark logs
  • 1 × 2″ × 12½″
  • 1 × 2″ × 11″
  • 1 × 2″ × 9½″
  • 1 × 2″ × 8″
  • 1 × 2″ × 6½″
  • 1 × 2″ × 5″
Fabric Ccentre square
  • 1 × 3½″ square

Between 4″ and 24″ these finished sizes put every cut on a ⅛″ ruler line: 4″, 5″, 6″, 7″, 8″, 9″, 10″, 11″, 12″, 13″, 14″, 15″, 16″, 17″, 18″, 19″, 20″, 21″, 22″, 23″, 24″.

Yardage for a whole quilt

Finished quilt: 56″ × 68″ from 20 blocks. Batting at least 64″ × 76″.

FabricBuyStrips across the width
Fabric Alight logs1⅜ yd1 × 11″, 1 × 9½″, 1 × 6½″, 1 × 5″, 1 × 3½″, 4 × 2″ strips
Fabric Bdark logs1⅝ yd1 × 12½″, 1 × 11″, 1 × 9½″, 1 × 6½″, 1 × 5″, 4 × 2″ strips
Fabric Ccentre square⅜ yd2 × 3½″ strips
Border⅞ yd6 strips 4½″ wide, joined end to end
Binding⅝ yd7 strips 2½″ wide (double-fold), 260″ joined
Backing (42″ fabric)3¾ yd2 panels 64″ long, 1 horizontal seam; backing 64″ × 76″

Yardage assumes 40″ of usable width, strips cut across the fabric, and 4″ for straightening, rounded up to the next ⅛ yard.

How it goes together

Log Cabin block pulled apart into its sewing rows
  1. Sew the first light log to the right side of the centre square and press away from the centre.
  2. Add the second light log along the bottom, then the first dark log on the left and the second dark log across the top. Each log is exactly as long as the side it is sewn to.
  3. Keep going clockwise, two lights then two darks, until three rounds (12 logs) are on.
  4. Press every seam away from the centre. Measure after each round: the unit should be 4, then 6, then 8 log-widths across, plus ½″.

Printable templates

For hand piecing, or to check a rotary cut against paper: one full-size template for each different shape, with the cutting line solid and the sewing line dashed, at the size in the cutting chart.

Print at 100% (“Actual size”) and measure the 1″ test square before cutting.

Notes on sewing the Log Cabin

The light logs of fabric A sit on two adjacent sides and the dark logs of fabric B on the other two, so the block divides along a diagonal into a light half and a dark half. A weak contrast between A and B makes the block look like uniform stripes and loses the split. A bright fabric C at the centre gives a focal point, and varying the logs within each side keeps the block lively.

Repeated, the light and dark halves of neighbouring blocks combine into larger shapes, and turning blocks by quarter turns makes diamonds, steps, zigzags and diagonal bars from the same block. A scrappy version with many fabrics in each half reads well when the light logs stay clearly lighter than the dark ones. It is a good block for beginners.

  • Press every seam away from the centre as each log is added. This keeps the block flat and makes the following round lie in the right direction.
  • Cut each log to the length of the side it joins and measure the block after every round. A block that is already wrong at round one cannot be rescued later.
  • Add the logs in the same clockwise order every time, two lights then two darks. Swapping the order partway through reverses the light and dark halves.
  • Use a consistent seam allowance, since each round builds on the last and a small error grows with every log. Chain-piece the logs for the same round across several blocks.

More strip-pieced blocks