Seam Quarter

Courthouse Steps quilt block

Courthouse Steps quilt block diagram
Courthouse Steps: 8 × 8 grid, 1 square and 12 rectangles.

A centre square of fabric C gains logs in pairs, fabric B top and bottom and fabric A at the sides, so the block grows in even rounds.

  • Fabric A light logs
  • Fabric B dark logs
  • Fabric C centre square

Cutting chart

For one 12″ finished block (12½″ with seam allowance). Change the size above for any other.

FabricCut
Fabric Alight logs
  • 2 × 2″ × 12½″
  • 2 × 2″ × 9½″
  • 2 × 2″ × 6½″
Fabric Bdark logs
  • 2 × 2″ × 9½″
  • 2 × 2″ × 6½″
  • 2 × 2″ × 3½″
Fabric Ccentre square
  • 1 × 3½″ square

Between 4″ and 24″ these finished sizes put every cut on a ⅛″ ruler line: 4″, 5″, 6″, 7″, 8″, 9″, 10″, 11″, 12″, 13″, 14″, 15″, 16″, 17″, 18″, 19″, 20″, 21″, 22″, 23″, 24″.

Yardage for a whole quilt

Finished quilt: 56″ × 68″ from 20 blocks. Batting at least 64″ × 76″.

FabricBuyStrips across the width
Fabric Alight logs1¾ yd2 × 12½″, 2 × 9½″, 2 × 6½″ strips
Fabric Bdark logs1¼ yd2 × 9½″, 2 × 6½″, 2 × 3½″ strips
Fabric Ccentre square⅜ yd2 × 3½″ strips
Border⅞ yd6 strips 4½″ wide, joined end to end
Binding⅝ yd7 strips 2½″ wide (double-fold), 260″ joined
Backing (42″ fabric)3¾ yd2 panels 64″ long, 1 horizontal seam; backing 64″ × 76″

Yardage assumes 40″ of usable width, strips cut across the fabric, and 4″ for straightening, rounded up to the next ⅛ yard.

How it goes together

Courthouse Steps block pulled apart into its sewing rows
  1. Sew the two shortest dark logs to the top and bottom of the centre square; press away from the centre.
  2. Sew the two shortest light logs to the left and right sides.
  3. Repeat round by round, darks on the top and bottom and lights on the sides, until three rounds (12 logs) are on.
  4. Both logs in a pair are the same length, so the block grows evenly and stays square if every seam is a true ¼″.

Printable templates

For hand piecing, or to check a rotary cut against paper: one full-size template for each different shape, with the cutting line solid and the sewing line dashed, at the size in the cutting chart.

Print at 100% (“Actual size”) and measure the 1″ test square before cutting.

Notes on sewing the Courthouse Steps

Dark logs of fabric B run across the top and bottom and light logs of fabric A down the sides, so the block reads as stepped wedges, dark above and below the centre and light to either side, symmetrical from left to right and top to bottom. When A and B are close in tone, the steps flatten into plain stripes. A bright centre of fabric C, and varied fabrics within each side, add life without losing the structure.

Set side by side in the same orientation, the dark wedges of blocks above and below each other meet in stepped dark diamonds, and the light wedges of neighbours to either side meet in light ones. A scrappy version reads best with one dark fabric and many lights, so the dark diamonds stay clear.

  • Cut both logs of each pair at the same time from the same strip, so the two sides of the block always grow by exactly the same amount.
  • Sew the top and bottom logs of fabric B first in each round, then the side logs of fabric A. Reversing the order partway turns the steps into the wrong shape.
  • Press every seam away from the centre. Because both logs in a pair are the same length, the block stays square as long as each seam is a true quarter inch.
  • Measure the block after each round and trim any extra length from the logs before the next round, so errors do not carry forward.

More strip-pieced blocks