Hourglass (quarter-square triangle) calculator
An hourglass unit is a square split on both diagonals into four triangles, usually two fabrics facing each other. The same quarter-square triangles fill the edges of a quilt set on point. Type the finished size and count for the cut sizes, or a block size for setting triangles.
| Method | Cut | From each fabric | Makes |
|---|---|---|---|
| Two at a time | 4¼″ squares | 2 | 4 hourglass units, exact size |
| Two at a time, trim | 4½″ squares | 2 | 4 units, trim to 3½″ |
| Cut triangles first | 4¼″ squares, cut twice diagonally | 2 | 8 triangles of each fabric |
Making hourglass units
Two at a time: cut one square of each fabric at the finished size plus 1¼″, make two half-square triangle units from them, then put those two units right sides together with opposite fabrics facing and the seams nested. Draw a diagonal across the seam, sew ¼″ on each side, cut on the line and press: two hourglass units. Adding 1½″ and trimming to the finished size plus ½″ keeps the centre point accurate if your seams run slightly wide.
Cutting the triangles first, from squares cut twice on the diagonal, puts the long side of each triangle on the straight grain. That matters for setting triangles, whose long side becomes the outside edge of the quilt.
The exact allowance is 1.207″, not 1¼″: why the long side needs more.
Setting triangles for blocks on point
When blocks are turned on point, triangles fill the gaps along the sides and at the corners. Side triangles have their long side on the quilt edge, so they come from a square cut twice on the diagonal. Corner triangles come from a square cut once.
| Triangle | Cut a square | Then | Yields |
|---|---|---|---|
| Side setting | 18¼″ | cut twice diagonally | 4 triangles, straight grain on the long side |
| Corner | 9⅜″ | cut once diagonally | 2 triangles, straight grain on the short sides |
The diagonal of a 12″ block is 16.971″. Sizes are rounded up to the next ⅛″. To let the block points float inside the border, cut both squares 1″ to 2″ larger and trim the quilt edge.
Cut sizes from 1″ to 12″
| Finished | Two at a time | Two, trim |
|---|---|---|
| 1″ | 2¼″ | 2½″ |
| 1½″ | 2¾″ | 3″ |
| 2″ | 3¼″ | 3½″ |
| 2½″ | 3¾″ | 4″ |
| 3″ | 4¼″ | 4½″ |
| 3½″ | 4¾″ | 5″ |
| 4″ | 5¼″ | 5½″ |
| 4½″ | 5¾″ | 6″ |
| 5″ | 6¼″ | 6½″ |
| 5½″ | 6¾″ | 7″ |
| 6″ | 7¼″ | 7½″ |
| 6½″ | 7¾″ | 8″ |
| 7″ | 8¼″ | 8½″ |
| 7½″ | 8¾″ | 9″ |
| 8″ | 9¼″ | 9½″ |
| 8½″ | 9¾″ | 10″ |
| 9″ | 10¼″ | 10½″ |
| 9½″ | 10¾″ | 11″ |
| 10″ | 11¼″ | 11½″ |
| 10½″ | 11¾″ | 12″ |
| 11″ | 12¼″ | 12½″ |
| 11½″ | 12¾″ | 13″ |
| 12″ | 13¼″ | 13½″ |